Electric Oil Pump with Portable Handle Electric Self-Priming Oil Transfer Pump AC 110V Electric Oil Change Extractor Pump for Cars and Boats

The ACTP60 model is a paint-based specification that comes in three color options: yellow, silver, and black. The pump is constructed using cast iron, aluminum alloy, and copper materials, and it adheres to the US standard plug configuration. Powered by a 110V 60Hz AC motor, the pump has a flow rate ranging from 20-60L/5.28-15.85 gallons per minute and a power output of 550 watts. It is self-priming and can reach a maximum speed of 3300 RPM, with a suction height of 5m/16ft and a maximum lift of 15m/49ft. The inlet and outlet size is 2.5cm/1in, and the power cord length is 1.88m/6.16ft. The maximum working pressure is 3 Bar, and the flowmeter has an accuracy of ± 1%, with a single counting range of 0 ～ 9999L/0 ～ 2641.46 Gallons (4-digit Liter, Maximum 9999L/2641.46 Gallons, Last 1-digit Liter with Scale). Assembly is required, and the product has a gross weight of 9.65kg/21.27 lbs and a net weight of 9kg/19.84 lbs. The product dimensions are 302020cm/11.87.97.9 in, and the package size is 302523cm/11.819.849.06 in.

The package includes 1 electric oil pump transfer fuel diesel, 1 English manual, 1 filter, and 2 connectors. It is important to note that the motor of this product is ordinary and not explosion-proof, and it is strictly prohibited to use gas and high ignition point media. Users should read the operating manual completely before use and pay particular attention to the safety instructions included. The oil pump will be tested with diesel oil before leaving the factory, so some diesel may remain in the machine, and it is recommended to use it after cleaning. Compatibility with the power supply and voltage should be checked before use. The oil inlet pipe and joints must not leak to ensure the suction range, and a strainer should be installed in the oil inlet pipe to avoid damage to the pump core due to hard debris being sucked into the pump cavity. The oil pump can work continuously, but idling without oil should not exceed 5 minutes to prevent damage to the pump core, oil seal, and vane. It is recommended to stop the pump after 20 minutes of continuous work for a short break to ensure the service life of the oil pump.

The product features high safety with a purple copper coil movement that can improve sealing, ensuring efficient, low-temperature, and safe operation of the motor. The waterproof switch protection cover and anti-breaking wire terminal also provide better protection for user safety. The portable ergonomic handle and lightweight design of 19.84 lbs make the oil transfer pump electric easy to carry and take outdoors for work. The strong power of the oil transfer pump electric, with a flow rate of up to 15.85 gallons and a lifting capacity of up to 16 feet, a power of up to 550W, and a speed of up to 3300 RPM, allows for fast and efficient job completion. The easy-to-operate design, with a one-touch switch and self-starting system, improves working efficiency and eliminates the need for additional accessories like a self-priming pump and bypass valve.

product information: